China ISO Approved 99.99% Pure Magnesium Alloy Extruded Bar / Rod
Details:
Name: magnesium alloy bar,dissolvable magnesium bar.
Magnesium alloy rods have a diameter of 70 - 800mm and can use the
most advanced low-pressure casting technology in China to produce
three-dimensional extruded rods with a diameter of 60mm and a
length of 500mm
| Hilbo Magnesium Alloy Material Co., Ltd. |
| TEL:86-769- 81288286 FAX:86-769- 82385085 Website:
www.magnesiumalloyplate.com |
| Address:No.1 West street Zhongnan North Road,Shang sha Community
Chang'An Town,Dong guan City, China |
| Quality Inspection Report |
AZ31B Magnesium alloy rod
Diameter 10mm-130mm | Chemical Component | AL | Zn | Mn | Fe | Si | Ni | Cu | BE | Mg |
| 3.020 | 0.9800 | 0.2700 | 0.0029 | 0.0200 | 0.0005 | 0.0021 | - | Blacne |
Tensile strength
Mpa | Elongation strength
Rp0.2/Mpa | Elongation after breaking
A/% | Conclusion :Passed inspection |
| 220 | 140 | 7% |
| Grade | Chemical Composition,% |
| Al | Zn | Mn | Zr | Si | Fe | Cu | Ni | Mg |
| AZ31 | 2.4-3.6 | 0.15-1.5 | 0.15-0.40 | | ≤0.10 | ≤0.05 | ≤0.05 | ≤0.005 | Bar |
| AZ40 | 3.0-4.0 | 0.20-0.80 | 0.15-0.50 | | ≤0.10 | ≤0.05 | ≤0.05 | ≤0.005 | Bar |
| AZ61 | | | | | | | | | Bar |
| AZ80 | 5.5-6.5 | 0.5-1.5 | 0.15-0.40 | | ≤0.10 | ≤0.005 | ≤0.05 | ≤0.005 | Bar |
| AZ91 | 8.5-9.5 | 0.45-0.90 | 0.07-0.40 | | ≤0.08 | ≤0.004 | ≤0.025 | ≤0.001 | Bar |
| ZK61 | ≤0.05 | 5.0-6.0 | ≤0.1 | 0.45-0.80 | ≤0.05 | 0.05 | ≤0.05 | ≤0.005 | Bar |
Feature:
High specific strength, elastic modulus, good heat dissipation and
eliminate shock resistance to withstand the shock load capacity
than aluminum,organic matter and alkali resistance and good
corrosion. Mainly used in aviation, aerospace, transportation,
chemical, rockets and other industrial sectors. In the utility
magnesium is the lightest metal and the proportion of magnesium is
about 2/3 of aluminum, iron 1/4. It is the lightest metal in
practical metal, high strength, high rigidity.
Application
Carving, aerospace, concrete tools, 3C (cell phone / camera /
compute), water heater, refrigerator, gas pipelines etc.
Product Advantages:
- Dissolves even at minimal electrolyte concentrations (from 1%) and
any temperature.
- The degradation by-product is a fine powder that does not interfere
with production.
- Any size available.
Performance test data:
| No. | Model | Test condition | Dissolution rate
mg/(cm2*h)) | Strength of extension(MPa) | Yield strength(MPa) | Elongation
(%) | Hardness
(HB) |
| 1 | HB006 | 93℃/3%KCl | 50-70 | ≥370 | ≥260 | ≥2.5 | ≥90 |
| 2 | HB006A | 93℃/3%KCl | 50-70 | ≥310 | ≥220 | ≥6.0 | ≥75 |
| 3 | HB008 | 93℃/3%KCl | 40-60 | ≥400 | ≥300 | ≥4.0 | ≥100 |
| 4 | HB008B | 93℃/3%KCl | 40-60 | ≥370 | ≥270 | ≥5 | ≥100 |
| 5 | HB008C | 93℃/3%KCl | 40-60 | ≥310 | ≥220 | ≥15 | ≥85 |
| 6 | HB012 | 93℃/3%KCl | 40-60 | ≥400 | ≥300 | ≥3.0 | ≥100 |
| 7 | HB011 | 93℃/3%KCl | 15-35 | ≥420 | ≥300 | ≥3.0 | ≥100 |
| 8 | HB016 | 93℃/3%KCl | 35-55 | ≥280 | ≥180 | ≥15 | ≥60 |
| 9 | HB017 | 93℃/3%KCl | 40-50 | ≥200 | ≥140 | ≥17 | ≥55 |
| 10 | HB018K | 50℃/0.84KCl | 50-70 | ≥240 | ≥170 | ≥12 | ≥55 |
| 11 | HB018 | 50℃/0.84KCl | 30-50 | ≥230 | ≥170 | ≥12 | ≥55 |
| 12 | HB010 | 93℃/3%KCl | 15-35 | ≥190 | ≥120 | ≥30 | ≥45 |
| 13 | HB022 | 43℃/0.05%KCl | 50-60 | ≥300 | ≥200 | ≥5.0 | ≥75 |
| 14 | HB023 | 43℃/0.05%KCl | 20-40 | ≥280 | ≥200 | ≥7.5 | ≥65 |
| 15 | HB024 | 43℃/0.05%KCl | 50-70 | ≥260 | ≥220 | ≥5 | ≥60 |
| 16 | HB013A | 43℃/0.05%KCl | 80-100 | ≥260 | ≥230 | ≥3.5 | ≥75 |
| 17 | HB025 | 50℃/0.84%KCl | 90-110 | ≥275 | ≥200 | ≥12 | ≥65 |
| 18 | HB026 | 93℃/3%KCl | 20-40 | ≥450 | ≥350 | ≥3.0 | ≥110 |
| 19 | HB808 | 50℃/0.84%KCl | 50-70 | ≥370 | ≥260 | ≥3.0 | ≥100 |
| 20 | HB019 | 50℃/0.84KCl | 45-65 | ≥230 | ≥180 | ≥12.0 | ≥55 |
| 21 | HB055 | 93℃/3%KCl | 130-150 | ≥220 | ≥160 | ≥12.0 | ≥55 |
| 22 | HB035 | 93℃/3%KCl | 50-100 | ≥100 | ≥60 | ≥42.0 | ≥35 |
| 23 | HBMM6 | 50℃/0.84%KCl | 70-100 | ≥260 | ≥230 | ≥10.0 | ≥60 |
| 24 | HBMM7 | 50℃/0.84%KCl | 90-120 | ≥270 | ≥240 | ≥9.0 | ≥65 |
| 25 | HBMM8 | 93℃/3%KCl | 100-150 | ≥280 | ≥250 | ≥5.0 | ≥65 |
Advantage of Hilbo Company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting
processing production line and precision testing equipment. Can
produce a variety of types of magnesium alloy and magnesium alloy
products, and developed a high-strength magnesium alloy extruded
sheet. Through the purification of ordinary magnesium, magnesium
can be raised up to 99.99% of high purity.
Cost advantage
Magnesium alloy casting production can customized as your
requirement. the technical process is great, extrusion production
required for a variety of bar, no need to purchase from abroad,
extrusion molding products is easy molding, low energy consumption,
saving production costs.
Workshop:
Product technology advantages
Engaged in magnesium smelting technology personnel with more than
15 years experience, from the selection of primary materials to
smelting processing has a wealth of experience and mature
management techniques.
We are in magnesium ingots, magnesium alloy extrusion products have
technical research and development capabilities. We are come out in
front in the Magnesium alloy production enterprises
Testing Equipment
Our Services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
Certificate:
We have attained ISO9001 and ISO14001 certificates, Standardize and
improve the enterprise quality management system.
FAQ:
Q1: Are you a manufacture or trading company?
A: We are a manufacture .
Q2. How about your delivery time?
A: It will take 5 to 15 days after receiving your advance payment.
The specific delivery time depends on the items and the quantity of
your order.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% balance against the copy of BL.
We'll show you the photos of the products and packages before you
pay the balance.
Q4. Can you produce according to the samples?
A: Yes, samples are available for you to check our quality, sample
delivery time will be 1-10 days.
Q5. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
customers have to pay the the courier cost.
Q7: What if there is some quality problem?
Please rest assured that we will be responsible for the products in
the end
Q8: How about the packing of your products?
Usually according to the customer's requirements.
Commonly used packaging information: small bundles, large pieces of
packaging, some sizes with plastic cover at both ends of the
protection, suitable for sea packaging.
